Stump Grinding in Lubbock
That stump from the tree the drought took is now a trip hazard, a termite magnet, and a weekly mowing obstacle. Grinding takes it below grade and gives the spot back to your lawn.
Call (806) 555-0119Stump Problems We Grind Out
The drought casualty's stump
Why it happens: The tree died in a dry year and got removed; the stump stayed as a monument. In this climate it neither rots quickly nor goes quietly - dry-country stumps outlast fences.
What we do: Ground 6 to 12 inches below grade, chips settled or hauled, spot ready for grass. One visit retires the monument.
Typical cost: $100 - $350 by diameter.
Suckers from the roots every summer
Why it happens: Siberian elm and mulberry resprout from the stump and roots indefinitely - cutting the tree was, as far as the roots know, a suggestion.
What we do: Grinding removes the crown tissue that drives the regrowth. Elms can push a few outlying root shoots for a season after; if yours is that species, the quote says so up front rather than letting June surprise you.
Typical cost: $100 - $350; persistent species flagged honestly.
Termites found the buffet
Why it happens: A softening stump is insect housing, and West Texas subterranean termites scout outward from it - toward, eventually, the structure.
What we do: Grinding removes the harborage and the wood mass. Scope honesty: if tubes have already reached the house, that next call is a pest professional. Prevention is our lane; extermination is theirs.
Typical cost: $100 - $350 - cheap next to any termite treatment plan.
The mower obstacle course
Why it happens: An ankle-high stump in bermuda grass wins every encounter with blades, trimmer line, and ankles. It has time; you have a Saturday.
What we do: Below-grade grind, soil cap, mow-flat by next season. Smallest job on the list, most satisfying per dollar.
Typical cost: The littlest stumps price at the floor of the range, right around $100.
The project the stump is blocking
Why it happens: New sod, a fence run, or a flower bed lands exactly on the old root flare.
What we do: Ask for the deep grind and the root flare plus surface runners come out too, leaving ground ready for sod or a shallow footing. Replanting the same hole is the honest exception - grindings starve new trees, and the better spot is a few feet over.
Typical cost: $100 - $350; deeper grinds at the top of the band.
A yard collecting stumps
Why it happens: Drought years and wind losses left three or four stumps staking claims around the lot.
What we do: One trip, every stump, shared setup - per-stump cost drops fast with count. The crew walks the yard first so the one hiding in the flower bed is on the quote too.
Typical cost: Multi-stump discounts on the written quote; four never cost four times one.
Utilities Before the Machine Starts
The grinder works exactly where sprinkler lines, drip systems, low-voltage lighting, and the occasional shallow service live. Locates get called before grinding - free and non-negotiable - and the walkthrough asks about the irrigation only you know about. Two minutes of pointing at valve boxes saves a geyser.
The Finish You Ask For
Standard: chips settle into the hole, mounded for settling, mow-flat within a season. Sod-ready: chips hauled, soil backfilled, plantable now - a small stated line item. Chips can also stay as free bed mulch; say where to pile them. The quote names the finish so the yard you get back is the one you pictured.
How It Works
- Free estimate on site. The estimator inspects the tree, the wind exposure, and what sits underneath it, then quotes in writing.
- Safe takedown or trim. Limbs come down in roped sections, lowered under control and clear of the roof, fence, and lines.
- Complete cleanup. Limbs chipped, wood hauled, yard raked. You will not find so much as a stray branch.
What It Costs
Stumps in Lubbock run $100 to $350 each by diameter at the ground. The machine's trip is the fixed cost, so second and third stumps always price below the first. Written quote first, utilities located before grinding, finish left mow-flat or sod-ready as you choose.
Stump Grinding Questions, Answered
What does stump grinding cost in Lubbock?
$100 to $350 per stump by diameter, with multi-stump visits pricing better per stump. One written quote lists each stump alongside the finish you picked for the ground.
How deep does the grind go?
6 to 12 inches below grade standard - enough to end regrowth and the insect hotel - and deeper on request for sod or construction spots.
How long does a stump grinding visit take?
Most single stumps are done inside an hour including setup and cleanup; a multi-stump yard usually wraps in a morning. You do not need to be home once the walkthrough is done - many customers point at the stumps, head to work, and come home to flat ground.
Can grass go there right away?
With the sod-ready finish, yes. With standard chip-fill, let it settle a season, top off, and seed. Both finishes are on the quote.
Will the machine tear up my yard?
Rubber tracks, boards on soft turf, gates as narrow as three feet. Expect the work spot disturbed and the path walked, not rutted - and raked before the crew leaves.
Do you check for sprinkler lines first?
Utility locates before every grind plus a walkthrough about irrigation and lighting. The depth the machine works is a crowded place; nobody legitimate grinds blind.
Can a new tree go in the same spot?
A few feet over is the honest answer - decomposing chips rob nitrogen and old roots crowd new ones. Exact-spot replanting means hauling chips and importing soil, quotable but rarely worth it.
Can you grind a stump right next to my fence or slab?
Usually - the wheel works within inches of hardscape, angled away from what matters. Hard against a foundation, the last sliver may stay by design, because a picket is replaceable and a footing is not. The walkthrough flags any such spot before the quote, not after the grind.
Need stump grinding in Lubbock?
Call (806) 555-0119Or text us and we will call you back to schedule.